Daily maintenance and overhaul of CNC ultrasonic cleaner

- Jul 19, 2019-

Daily maintenance and overhaul of Shanghai CNC ultrasonic cleaner;

 1. Power supply: Use the power supply and power cord that meet the specifications of the equipment. The air switch dedicated to the washer must be installed in the power circuit of the user to cut the power of the washer when needed.

 2. Grounding wire: The cleaning machine body and generator will be equipped with a special grounding wire on the power supply lead, and it is clearly distinguished from other wires because the device is in contact with water and corrosive (swelling) liquid level. Cause leakage, please connect the grounding wire according to safety requirements;

 3, the equipment uses non-combustible detergent, do not use flammable and explosive substances as a detergent, the use of equipment must be ensured away from the flammable and explosive substances, when the user must use certain substances in special circumstances, You must consult the company to confirm the safety and make appropriate safety protection measures;

 4. No liquid or insufficient liquid level in the cleaning tank will cause irreversible damage to the equipment. It is necessary to ensure that a sufficient amount of cleaning liquid is injected into the tank, otherwise the relevant electric heater, pump and ultrasonic vibrator may be damaged. May lead to fire and personal injury;

 5, electrical control box and related electrical components, etc., be careful not to splash water, and away from water vapor, corrosive gases, dust, etc.;

 6. When the equipment is abnormal, please contact our company in time or stop the power supply and check it by an experienced professional electrician;

 7. The workpiece to be cleaned should be hung with a washing basket or hanger with feet. It should be placed in the tank to be washed. It is forbidden to put the workpiece directly into the bottom of the tank for cleaning, otherwise it may cause damage to the workpiece and the bottom of the tank;

 8. When the equipment is working, there may be factors such as high temperature, high voltage, electrification of the surface of the electrical component terminals, movement of the transmission mechanism, pressure surge, etc., which may cause personal injury. Do not open the casing during work to avoid unprotected conditions. Work under

 9. When the equipment is not used for a long time, please release the cleaning liquid, dry the inner tank and the surface and protect with the film to prevent the corrosion and aging of the equipment from speeding up;

 10. Keep the ventilation, dryness and cleanliness of the equipment workplace, which is conducive to long-term efficient operation of the equipment and optimization of working environment conditions;

 11. When the cleaning liquid is too dirty, it should be disposed of in time, regularly clean the dirt in the cleaning tank and the storage tank, keep the cleaning tank and the appearance clean, and improve the durability of the washing tank;